• TRIOPROC3930 consisting of TrioPod PRO75 tripod shoulder,
3x C3930-3-segment carbon legs, 2 x A1010 mini-legs, tripod
bag and multi-tool UVP.
NOVOFLEX enlarges its TrioPod tripod assortment
Modular professional tripod TrioPod PRO75
Since almost four years the NOVOFLEX tripod series TrioPod
belongs to the most innovative tripod systems on the market.
The Memmingen think tank is now enlarging this tripod series
with a modular-designed professional type, the TrioPod PRO75.
Basis for this completely new conceived, modular-designed professional
type is the new tripod shoulder TRIOPOD PRO75, which features great stability and a higher load capacity compared to the smaller TrioPod series tripods. The same applies to the new, clearly more robust, exchangeable 8-layered carbon fiber legs, which are available with three or four segments. The largest carbon tube has a diameter of 39 mm. Thanks to the reinforced design of the individual components, the TrioPod PRO75 can be used for even heaviest photo and video equipment.
The maximum load capacity is now 65 kg/143 lbs.
A new feature of the tripod shoulder is the cover plate that can easily be detached and – if desired – can be replaced with a levelling ball (MBAL-PRO75) or a geared center column (TRIO CC-PRO75). Compatible accessories of other manufacturers can also be used in the standardized tripod shoulder. These accessories
can easily be fitted and locked in the tripod shoulder. The levelling ball has a surface of 75 mm and has a 15° movement in any direction.
The levelling ball cannot only be used with the TrioPod PRO75 tripod shoulder, but also with any tripod with 1/4“ resp. 3/8“ connection. The self-impending center column is equipped with 1/4“ resp. 3/8“ threaded stuts at both ends and can be adjusted in height by 48 cm/19 in.
- 3-section carbon fiber legs, 8-layered
- max. working height: 154cm/60.6"
- min. working height: ~5,5cm/2.2"
- Folded Length (Basis mit Beinen, normal): 69cm/27"
- Load Capacity: 65kg/143lbs
Top threaded stud: 3/8-16
Lateral accessory connector: 2x 1/4-20 recessed
- Ratcheting Angle Stops: 23°, 45°, 65°, 87°, 155°, 180° as well as 43° (inverted)
- Legs fold up at 180° for transport
- Ø Carbon fiber tubes (mm): 39; 35,5; 31,5
- Weight: 3205g/7.1lbs
- rubber feet, can be unscrewes and replaced by a 3/8-16 steel spike
- 2 macro mini legs and carrying case included
DetailsFor shoots on ground surface the tripod shoulder disposes of locking positions, with which the legs can be strutted apart in angles of 23°, 45°, 65° and 87°. In case of constricted room during indoor shootings a further locking position of 155° enables to strut the tripod at walls etc.
Particulary innovative is a new additional strut of 43° that allows the tripod to be swiveled quickly for ground-level work, eliminating the need to reverse the center column and / or the tripod head. The numerous different locking positions are helpful in case of transport, itself. In order to reach smaller packing sizes, the legs fold up at 180°.
In addition to the recommended new tripod legs C3930 (161cm/60.5cm – 63in/24in) and C3940 (161cm/50cm – 63in/19.7in) legs of TrioPod- and QuadroPod-systems can already be used with the new tripod shoulder TrioPod PRO75 as well.